Sunday, November 4, 2012

My Quadrotor Helicopter.



    This is my 400mm size quadrotor helicopter. Due to the still testing, the wire had no arrange and no cut out.

    I had manual control R/C helicopter only once experience many years ago. I think is difficult for me. I use firmware MulitWii 2.1 in my quadrotor, all parameters default setting. MulitWii default setting well done, In addition to the slight oscillates in the wind for my quadrotor.

    I flew three times this holiday season, is a thrilling flown! I could control in a simple environment gradually, but landing.

    Because of my lack and this frame too fragile. the landing gear broken down.

    During three times flying, only landing gear broken, is good news for me and good news for my money. I will use landing gear of 450 size helicopter replace it.

5 comments:

  1. 再問一下你的ESC是多少A 的?

    ReplyDelete
    Replies
    1. 我買30A的,我覺得20A就夠了,但是我看20A跟30A差沒多少重量,所以就買30A的了.

      Delete
    2. 網路上我這顆馬達
      Max current: 17A
      Max power: 180W

      Delete
  2. 我也想組裝一台自己的!
    想請問一下零件都去哪裡買啊?

    ReplyDelete
    Replies
    1. 台灣可在露天拍賣買零件,或是到國外網站訂購會便宜很多,選擇性也多。可從hobbyking訂。

      Delete